Flash Mode-Multi Stroboscopic Flash
According to one shutter signal, the flash will generate a series of fast flashes, and
multiply images will be integrated in one picture. It is useful to capture trajectory
of a moving object. You can set flash output power, flash frequency and number of
flashes. Maximum number of flashes is 20 and maximum flash frequency is 30Hz.
1. Set Flash Mode <Multi>
Appuyez brièvement sur la touche
[MODE], le flash sera défini sur
<Multi>.
2. Set Flash Output
Shortly press [ + ] button or [ - ] button to set flash output power.
3. Set number of flashes
Long press [AUDIO] button till number of flashes parameter blinks. Press [ + ] button
or [ - ] button to set number of flashes.
4. Set flash frequency
Long press [AUDIO] button till nu-
mber of flashes blinks. Shortly press
[AUDIO] button, flash frequency pa-
rameter blinks. Press [ + ] button or
[ - ] button to set flash frequency.
Press [ + ] button or [ - ] button to set
flash frequency.
EN
FR
ES
15