EN
Flash Capacitor Preventative Maintenance
One of the most important components of an electronic flash is the capacitor. Fol-
FR
lowing the preventative maintenance below will increase the life and the reliability
of your flash.
If the unit is left unused for 3 months or predominantly used at low power settings,
ES
it is recommended that the power be increased to maximum and the unit left
switched on (modeling lamp OFF) occasionally for at least 30 minutes to help
preserve the life of the capacitors.
USB Firmware Update
1. Visit Starblitz® official website (www.starblitz.fr/en/) to download the firmware
upgrading drive and the firmware of the latest version.
2. Turn off the power, and press and hold [MODE] button, meanwhile, switch on the
power. Then, the screen will display an interface indicating firmware upgrade is ac-
cessible.
3. Connect the flash to PC with a USB cable (not included).
4. Follow the tips on the software to finish firmware upgrade.
Main features
Build: strong and sturdy, Light and handy, great features, highlight outdoors hooting
quality
Lithium battery: Adapt high-performance and user replaceable Lithium battery,
2.8s fast charging recycling system, 500 full power shoots per charge.
Power: 400Ws flash output, GN70, enough power for on-location shoot. Whether
shoot in bright sunshine or low-light environment, Starblitz® ASPIC allow you to get
perfect image.
LED modeling lamp: Starblitz® ASPIC studio flash use advanced 13W LED modeling
lamp. brightness adjustable in 6 steps.
1/8000s High speed sync: When High Speed Sync function is activated, the maxi-
mum sync speed is up to 1/8000s. When photographers shoot outdoors in bright sun
with wide open aperture, fast shutter speed can cut the ambient light, get amazing
result as you want
TT Lauto flash: Starblitz® ASPIC studio flash has build-in TTL receiver function. It is
ready for TTL communication with camera attached with SST-818TX TTL transmitter.
Photographer can realize proper exposure without adjusting aperture or shutter.
22