Fermax 5264 Manual De Usuario página 8

Antena hf manos libres
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Cod. 97841 V06_17
Operating
When the equipment is switched on, the led blinks red to make as many as the channel you have configured and so
many flashes green as the group have configured. Then the LED will be solid green.
By bringing the tag/transmitter close to the hands-free activator or pressing the button, the activator will send a
signal to the receiver in which it is programmed.
Disabling the activation area
If you connect the cable Sync IN, green wire, to ground (GND), black wire, you
disable the trigger area and the tag/transmitter will not work.
Use of the equipment
These equipements are designed for use as access controls for automatic doors.
The manufacturer reserves the right to modify equipment specifications without prior notice.
Warning
Some structural elements of a building can affect the propagation of the signal that activates the tag. This can lead
to accidental activation of the tag when the unit is at a distance greater than 3m from the trigger. If this happens
move the tag or the trigger of his current location.
Cod. 97841 V06_17
Operating
When the equipment is switched on, the led blinks red to make as many as the channel you have configured and so
many flashes green as the group have configured. Then the LED will be solid green.
By bringing the tag/transmitter close to the hands-free activator or pressing the button, the activator will send a
signal to the receiver in which it is programmed.
Disabling the activation area
If you connect the cable Sync IN, green wire, to ground (GND), black wire, you
disable the trigger area and the tag/transmitter will not work.
Use of the equipment
These equipements are designed for use as access controls for automatic doors.
The manufacturer reserves the right to modify equipment specifications without prior notice.
Warning
Some structural elements of a building can affect the propagation of the signal that activates the tag. This can lead
to accidental activation of the tag when the unit is at a distance greater than 3m from the trigger. If this happens
move the tag or the trigger of his current location.
2
2
3200286
3200286

Publicidad

Tabla de contenido
loading

Tabla de contenido