Communication Ports; Rs232 And Usb Connectors; Communication Slots - Siel SAFEPOWER-EVO-HF 10 kVA Manual De Instalacion Y Uso

C
OMMUNICATION
The UPS is supplied with the following communication ports (see "Views of the UPS):
Serial port available with RS232 connector and USB connector.
NOTE: the use of one connector automatically excludes the other.
Port AS400
Expansion slots for additional COMMUNICATION SLOT interface boards
On the front, covered by the terminal-cover, there is another expansion slot for the power relay board (4 programmable
contacts, 250Vac, 3A)
RS232 USB C
AND
PIN # NAME
1
2 TX
3 RX
4
5 GND POWER
6
7
8 +15V POWER
9 WKATX
C
OMMUNICATION
The UPS is equipped with two expansion slots for accessory communication boards that enable the equipment to
communicate using the main communication standards.
Some examples:
Second RS232 port
Serial duplicator
Ethernet agent with TCP/IP, HTTP and SNMP protocol
RS232 + RS485 port with JBUS / MODBUS protocol
For further information on the accessories available, visit the web site.
IV330 Rev.001 SIEL S.p.A.
Data di emissione: 2011-09-28
P
ORTS
ONNECTORS
RS232 CONNECTOR
TYPE SIGNAL
IN
OUT Serial line TX
IN Serial line RX
OUT
Isolated power supply
15V±5% 80mA max
OUT ATX power supply wake-up
S
LOTS
USB CONNECTOR
4 3
1 2
PIN # SIGNAL
1 VBUS
2 D-
3 D+
4 GND
Pag. 89 di 252 + FR