Ibiza Light IBIZA400RGB Manual De Instrucciones página 2

Thanks for your purchasing our RGB laser show system. Please read this
manual carefully before operating the system. It gives you general
information for safe and better operation.
INSPECTION
Check for the contents in the package refer to the following
1. RGB Laser light effect unit: 1
2. Remote control
3. Power cable: 1
4. User's manual: 1
Function Setting
MODE:
'Audi': SOUND CONTROL
'Auto': AUTO-PLAY CONTROL
'dxxx': DMX512 CONTROL, xxx is DMX address
UP: DMX address up
DOWN: DMX address down
ENTER: PLEASE PRESS ENTER AFTER EVERY CHANGE
1. First of all, make sure that the supplied voltage matches the voltage marked
on the base of the laser unit;
2. Installation should be made by an experienced technician. Fasten the laser
unit and adjust the angle of the laser light to suit your needs.
3. Please check that the fan and the ventilation holes are not blocked;
4. A hole is provided to secure the unit with an additional safety cable if the unit
is installed on the ceiling. Make sure that the safety cable and mounting
place can carry at least 10 times the weight of the unit.
5. The laser unit should be securely installed.
6. For safety reasons, the unit must be earthed.
© Copyright Lotronic 2015
GB – USER MANUAL
Installation
2
list: