Inserting Batteries - LaserLiner DistanceMaster Compact Plus Manual De Instrucciones

DistanceMaster Compact Plus
– The measuring accuracy may be affected when working close to high
voltages or high electromagnetic alternating fields.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic compatibility
and wireless radiation regulations and limits in accordance with
the RED 2014/53/EU.
– Umarex GmbH & Co. KG hereby declares that the DistanceMaster
Compact Plus radio equipment complies with the essential requirements
and other provisions of the European Radio Equipment Directive
2014/53/EU (RED). The EU Declaration of Conformity can be found
in its entirety at the following address:
http://laserliner.com/info?an=ACG
e f
d
c
b
a
k
1.
3.
* The Bluetooth word mark and the logo are registered trademarks of Bluetooth SIG Inc.
®

Inserting batteries

Open the battery compartment and insert batteries according
to the symbols. Be sure to pay attention to polarity.
g h
i
j
2.
4.
(see Fig. A)
DISPLAY:
a Measurement point (reference)
rear / front
b
The bar diagram shows how well
suited the reflection surface is for
measurement.This is particularly
useful for measuring over long
distances, dark surfaces or bright
ambient light.
c Memory
d
Malfunction / service required
e function
Bluetooth
®*
f Display length / area / volume
g Bluetooth function activated
®*
h Battery symbol
i Intermediate values / min/max values
j Measurement values / Measurement
results Unit m / ft / inch / _' _"
k Min/max continuous measurement
KEYPAD:
1. ON / Measure /
min/max continuous measurement
2. length, area, volume / Bluetooth
function / Memory
3. Measurement point (reference)
rear / front /
Unit of measure m / ft / inch / _' _" /
enable Bluetooth
4. OFF / delete last measurement values
®*
function
®*
EN
11