LaserLiner BatteryCheck Manual De Instrucciones página 6

Additional information on use
The scale divides the usability of batteries in mobile devices into
„good", „weak" and „replace".
The divisions are based on general average values for constant use
and can vary in devices with abnormal current consumption.
Especially in devices with high, temporary current peaks and/or for
inferior quality batteries, it may be necessary to change the battery
earlier than indicated on the display.
Devices with efficient power management can generally still operate
effectively even when the batteries are almost completely discharged.
In such cases try to correspondingly interpret the deflection of the
pointer in relation to the operating time of your specific device/
batteries to ensure optimum utilisation of the batteries.
1
To check battery charge
Open battery holder and insert
batteries corresponding to the
polarity symbols or place 9V block
batteries on the contacts 2a and 2b.
Be sure to pay attention to polarity.
3-colour display scale
Good (green): battery
fully charged
Weak (orange): battery is
weak and will soon need
replacing
Replace (red): battery is flat
and should be replaced
Technical data
Measuring ranges
Battery types
Dimensions (W x H x D)
Weight
Subject to technical changes without notice. 08.14
06
GB
1,5V / 9,0V
1,5V
AAA, SH16, MN2400, LR03, R03
AA, HP7, MN1500, UM3, LR6, R6
C, HP11, MN1400, SP11, LR14, R14, UM2
D, HP2, MN1399, SP2, R20, UM1, LR20
LR41, LR43, LR44
9,0V
6LR61, 6F22, 6LF22
PP3, MN1604, 6F22, 006P
67 x 110 x 32,5 mm
51 g