Safety Information - LaserLiner BatteryCheck Manual De Instrucciones

Read the operating instructions and the enclosed brochure
!
„Guarantee and additional notices" completely. Follow the
instructions they contain. Safely keep these documents for
future reference.
Function / Application
This battery tester is used to check all commonly used batteries
(AA / AAA / C / D / 9V / 1.5V button cells). The battery charge level
is shown on a clear 3-colour scale. Operates without a power supply.
2a
1a
1b

Safety information

– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The tester operates in the voltage range from 1.5V to 9V.
Make sure the inserted, correspondingly rated batteries only
make contact at the marked contact surfaces.
– Insert the batteries the right way round to ensure correct polarity;
polarity reversal can adversely affect operation of the device.
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications. Modifications
or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
2b
BatteryCheck
1
Battery holder:
Button cell (1.5V) /
Micro AAA / Mignon AA /
3
Baby C / Mono D
1a
Negative pole, battery holder
1b Positive pole, battery holder
2 Battery holder:
9V block
2a
Negative pole, battery holder
2b Positive pole, battery holder
3 3-colour display scale
green: good
orange: weak
red: replace
05
GB