LaserLiner MoistureFinder Compact Manual De Instrucciones página 10

Material characteristics
3
This instrument has 4 selectable material
characteristics. Before making a measure-
ment, press the MODE button to select
the appropriate material.
Screed cement screed CT-C30-F4 DIN EN 13813
gypsum plaster (machine plaster) in accordance
Plaster
with DIN EN 13279-1/plaster thickness = 10 mm
Soft- low-density woods: e.g. spruce, pine, limewood,
wood poplar, cedar, mahogany
Hard-
higher-density woods: e.g. beech, oak, ash, birch
wood
Wet/dry LED indicator
4
In addition to numeric measurement display in % of relative
material moisture, the LED display also provides a material-
dependent evaluation of moisture. The LED display bar
becomes larger, from left to right, with increasing moisture
content. The 12-position LED display is subdivided into 4 green
(dry), 3 yellow (moist) and 5 red (wet) segments. Wet material
causes an additional acoustic signal.
! The classification „dry" means that materials in a heated
room have reached a balanced moisture level and are thus
suitable for further processing.
Application notices
5
10
EN