Area Measurement; Volume Measurement; Important Notices - LaserLiner DistanceCheck Manual De Instrucciones

Length measurement:
device on
1x

Area measurement:

area

Volume measurement:

volume
min/max continuous measurement:
The LC display shows the max value, the min value, the differential
value and the current value.

Important notices

• The laser points to the location that will be measured.
No objects may get into the laser's line of measurement.
• The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
• The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the
maximum deviation may be greater than 3 mm.
10
GB
1 sec
1. measurement
1. measure-
ment
1x
Press for 3 seconds
then release button
3 sec
1x
measure
2x
2. measurement
1x
2. measure-
ment
2x
2x
3. measure-
ment
3x
stop
2x