Safety Regulations; General Safety Instructions; Working Clothes; When Transporting The Equipment - Solo 113 Manual De Instrucciones

Safety regulations

1.1 General safety instructions

Read the operating instructions carefully before taking this equipment into service and keep them in a safe
place. Use this power tool with particular caution.
Non-observance of safety instructions can lead to a risk to life. Also observe any regulations from your professional body.
These operating instructions must always be available at the place of work. All individuals instructed to work with the
equipment (including maintenance, care and repair), should read these instructions.
You should request and receive instructions from the vendor on the safe operation if you are using this type of product
for the first time.
This machine may only be used within the prescribed scope of application as stated in section 5.1 "Scope of Application".
Never expose this power tool to rain. Never use this equipment in moist or wet conditions.
Children and young persons under the age of 18 years may not work with this power tool, with the exception of young
people over the age of 16 years who are being trained under supervision.
Keep bystanders and animals away from the working area. Maintain a minimum distance of 15 m. When working near
thickets, be aware that children and animals may be hidden there. Immediately stop the machine and the cutter if any
person or animal comes close to the working area. The operator is responsible for any accidents or damage caused to
individuals or property.
This machine may only be passed on or lent to third parties if they are familiar with the safe use of this product and with
these instructions. Always supply the manual with the machine.
Ensure you are rested and in good health when using this machine.
Persons under the influence of alcohol or drugs, including prescription drugs, are not allowed to use this machine, as their
ability to quickly react to potential danger may be impaired.
Never alter, change or modify any safety equipment or functional assemblies on this machine.
Only use this machine if it is in good, safe condition. Always check the machine prior to use. Risk of accident!
Only use those accessories and attachments that have been supplied by the manufacturer and that are expressly approved
for attachment. When using a nylon head, never replace a plastic line with a steel line. Always use the appropriate guard
with each cutter.
Before replacing the cutting blades, always first stop the motor and pull the mains plug from its socket to prevent an
accidental starting of the motor.
The reliability and safe operation of your machine depend on the quality of parts used with the machine. Only use
original spare parts. Original spare parts are identical with genuine production parts and guarantee best quality in
material, dimensions, function and safety. Original parts and accessories are available from your specialist dealer. Your
dealer has been supplied with appropriate documentation to determine the correct parts. Your dealer is frequently
supplied with updates about improvements to the equipment. Please note that the use of non-original parts will void your
warranty.
Always store the machine in a safe place and in such a way that it will not pose any danger. Stop the motor when the
machine is not used.
Persons who disregard safety instructions, operating or maintenance instructions may be liable for any damage or
consequential losses.

1.2 Working clothes

To prevent injuries, always wear suitable clothing and safety equipment when working with this power tool. This clothing
should be practically oriented to the application (for example a tight fitting work suit), but should not be confining.
Never wear scarves, ties, jewellery or other items of clothing, which might get caught in the equipment, in brush or on
branches. Safely tie back long hair (use a cap, helmet or similar).
Wear sturdy shoes with a good profile - ideally safety shoes.
Wear protective gloves with non-slip palms.
Use ear defenders and/or a visor for protection against flying objects or objects caught up in the
turbulence (protective goggles for example).

1.3 When transporting the equipment

Always turn off the motor when transporting the machine.
Never carry or transport the brushcutter with the motor running.
Always cover the cutters with blade protectors, when transporting the equipment over longer distances.
ENGLISH 4
1. Safety regulations