Description - Hilti TE 1000-AVR Manual De Instrucciones

Ocultar thumbs Ver también para TE 1000-AVR:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Obligation signs
en
Wear eye
Wear a hard
protection
Wear safety
Wear
shoes
breathing
protection
Symbols
Read the
Returning
operating
materials for
instructions
recycling
before use
Alternating
Hertz
current

2 Description

2.1 Use of the product as directed
The power tool is an electrically-powered breaker with electropneumatic hammering mechanism designed for heavy
chiseling work.
The power tool is designed for breaking / removing and demolishing concrete, masonry, stone or asphalt.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
Observe national health and safety requirements.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not
as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
The power tool may be used only in a dry environment.
Do not use the power tool where there is a risk of fire or explosion.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Modification of the power tool or tampering with its parts is not permissible.
2.2 Chuck
TE‑S quick-change chuck
2
Wear ear
hat
protection
Volts
Double
insulated
Location of identification data on the power tool
The type designation can be found on the type identifica-
tion plate and the serial number on the side of the casing.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.
Wear
protective
Type:
gloves
Generation: 02
Serial no.:
Amps

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido