JF MIX 4000 CS Manual De Instrucciones página 30

Unloading when the Wagon is
moving:
1.
Release the discharge tube from the
support (R).
2.
Position the Mixer Wagon at the loading
starting point.
3.
Position the joystick in the tractor cab. (This
way, the driver will have total control over
the unloading).
4.
Press and hold button (A) from the Joystick
in order to open the discharge door. Keep
it pressed until you get the ideal opening.
Release the button (A) to stop the door.
5.
Press button (C) from the Joystick to turn
on the discharge screw.
6.
Drive the tractor in a compatible speed
with the unloading flow, so that you get a
uniform distribution in the trough.
a
scale affixed on The
,
door opening being
.
ToTally open
7.
When you finish the unloading, press and
hold button (B) from the Joystick to close
the Wagon door.
8.
Wait until the screw is completely empty.
9.
Using the Joystick again, press and release
button (C) to turn off the discharge screw.
10.
Replace the discharge tube in the support,
in transportation position, as indicated in
the picture beside.
IMPORTANT!
i
n order To ensure consTanT unloading
ideal for The TracTor To work wiTh a flow of
40 /
liTers minuTe in The pump
30
w
agon indicaTes The
0
ToTally closed and
.
Instructions Manual
10
SCALE
,
iT is
After the unloading, place the
tube in the rest position.
JOYSTICK
R
A
C
T
B