5 - Changing the ring tone for the call button:
The ring tone corresponding to the detector is fixed, for a call from the button you can
choose a ring tone similar or different from the PIR detector.
The chime has 32 different ring tones. Select the melody, either by the front button on the
chime, or the
(P)
The activated ring tone will be the last heard.
6 - Important :
Your WECR 55502 kit is a sensitive electronic device, please respect the following
instructions :
• Use alkaline batteries, they have a higher life time and do not leak easily.
• Do not use different types of batteries or new and worn batteries together.
• Never use rechargeable "batteries".
• Remove the batteries if you do not use the kit during a long time.
• Protect your device from rain or humidity
• Do not fix anything on metal surface
• Respect the environment, dispose of batteries in accordance with local requirements.
7 - Defaults:
Default
The chime
■
does not ring
Ne fonctionne
■
pas en distance
8- Assistance :
• This kit is warranted 1 year in our facilities (non-warranted battery(ies)). Attach the
sales slip to the product as proof of purchase.
• The last version of this manual is available on: www.cfi-extel.com
pushbutton
(figure 5)
Possible cause
• The chime is out of range
• The batteries are worn
• Disturbances
• The protection of the
battery is not removed
• The battery of the
transmitter is worn
• Radio-disturbances
• Incorrect installation of the
transmitter
• Incorrect installation of the
chime
located inside the call button.
Solution
•Change the place of the chime
• Change the batteries
• Check that no obstacle placed
between or around the device is
affecting the transmission.
•Remove this protection by opening
the call button.
•Change the battery.
• Check that nothing disturbs the trans-
mission: wireless phone, C.B, computer,
device which irradiates...
• Check that the transmitter is not
placed on metal surface.
• Check that the chime receptor is
installed high up.