Icons; Changeover Confi Rmation Screen - Mitsubishi Heavy Industries SC-SL3NA-AE Manual Del Propietário

Icons

(1) Unit icon
The unit status is shown by colors.
(Red) Running (when at least one unit is running)
(Green) Stopped (when all units are stopped)
(Yellow) Malfunction of one or more units
(Blue) Communication error with one or more units
(2) Filter sign
If at least one air conditioning unit in a block or group needs fi lter maintenance, this indicator lights up. When
this happens, clean the fi lters.
(3) Maintenance Indicator
When the maintenance indicator is lit for at least one air conditioning unit in a block or group, the mainte-
nance indicator is displayed. If the maintenance indicators are off on all units, the maintenance indicator
turns off. Contact the shop where the units were purchased if this indicator is on.
(Gray) Inspection, Inspection 1, Inspection 2
(Yellow) Backup operation (Inspection 3)
(4) Scheduling
This shows the groups that are the targets of the current day's schedule.
(5) Air direction
This shows the status of louver operation.
Swinging
(AUTO)
(6) Unit states
The unit status is shown by fi gures.
Error stop (One or more units have been stopped because of malfunction.)
Please contact the shop where the unit was purchased.
Demand (The external signal is input to the demand terminal.
The target unit will switch to fan mode and remote controller operations are prohibited. When the ex-
ternal signal is cancelled, the setting will return.
Emergency stop (The external signal is input to the emergency stop terminal.)
All connected units stop and are prohibited operation. When the emergency stop signal is cancelled,
the remote controller lock/unlock setting will be reverted but the units remain stopped. If schedule set-
ting was done, the units start operation according to the set schedule.
Changeover Confi rmation Screen
Position 1 Position 2
(STOP 1) (STOP 2)
Position 3
(STOP 3)
This is a screen for confi rming the changes to various set-
tings. The text displayed varies according to the screen
called up, but the operation is as follows.
Press the Yes button to save the settings and to exit. Press
the No button to exit without saving your settings.
– 10 –
Position 4
(STOP 4)
page 12)