Group Batch Operation - Mitsubishi Heavy Industries SC-SL3NA-AE Manual Del Propietário

5. Press the button for the item to set or change.
· Run/Stop: Press the RUN or STOP button.
With the RUN button, running starts, and with the STOP button, running stops.
· Temperature setting: Press ▲ or ▼.
· Mode: Select
* Auto mode can be enabled in the Function Settings.
· LOCK: Press
If is pressed, remote controller operations are permitted, and if
hibited.
· Fan speed: select
can be enabled in the Function Settings.
· Air direction: select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button.
· FILTER: if the reset button is pressed, the fi lter sign turns off.
The unit operates with the maximum fan speed.
6. Press the SET button. Press the Yes button on the confi rmation screen.
When you do not want to set, press the No button.
Note
• If the BACK button is pressed, it returns to the previous screen.
• If individual lock/unlock is enabled in the Function Setting, it is possible to set the remote controller op-
erations to permit or prohibit each item such as run/stop, mode and temperature setting.
• When individual lock/unlock are enabled in the Function Setting, remote controller operations are prohib-
ited if run/stop, mode and temperature setting are all
have been permitted.)

Group Batch Operation

This section shows how to set or change the detailed setting of Batch Operation.
Set the groups for batch operation in advance.
1. Press the CHANGE ALL button on the MAIN MENU.
The CHANGE ALL screen is displayed.
Note
When the screen changes, no items are selected (the temperature setting is blank). Set only the items that
are to be set or changed.
Set a temperature between 18 and 30°C.
Auto, Cool, Dry,
or .
, , or , and press the button.
Fan or Heat by pressing the button.
Page 27
. (Some functions, such as reset of the fi lter sign
Page 111, 1256
Page 7
[Individual lock/unlock settings enabled in Function
Setting]
This function can be applied to the indoor units,
3
which are the model KXE4 or later, and to the
2
remote controller, which is the model RC-E1 or
later.
– 19 –
is pressed, they are pro-