Mitsubishi Heavy Industries SC-SL3NA-AE Manual Del Propietário página 30

2. Press the "Export monthly data fi les to USB" button.
Select the folder on the Folder Selection screen.
3
3. Press the folder to be selected.
To change the page, press the PREV or NEXT button.
4. Press the OK button.
A confi rmation screen (Calculating data fi le export confi rmation screen / Defi nition fi le backup confi rmation
screen) is displayed. Press the "OK" button on either of the screens.
Note
• If the CANCEL button is pressed, it returns to the previous screen.
• The "Import a confi guration fi le from USB" button is not needed.
• See the bundled CD-ROM for calculating on a PC.
Important!!
Calculating Data
(1) Follow the above procedure to transfer the calculating data to USB memory.
(2) Remove the USB memory from the central control and connect it to a PC.
(3) Insert the CD-ROM that was bundled with this unit into the PC and start the software.
(4) Operate the software according to the CD-ROM menu.
* There is no need to have the USB memory connected to this unit at all times.
* After installing the calculating data software, steps (3) and (4) are unnecessary. Operate
the software with reference to the manual on the CD-ROM.
<Transferring Defi nition Data>
1. Press IMPORT EXPORT button on the MAIN MENU.
2. Press the "Export a confi guration fi le to USB" button.
Select the folder on the Folder Selection screen.
Note
• If the BACK button is pressed, it returns to the previous screen.
• The "Import a confi guration fi le from USB" button is not needed.
By backing up the Defi nition data, the following data can be easily backed up;
· Block and group defi nitions
· Schedule settings
[Folder Selection screen]
[Import/Export screen]
Page 7
2
Above [Folder Selection screen]
– 29 –
4