Mitsubishi Heavy Industries SC-SL3NA-AE Manual Del Propietário página 15

3 Adding and deleting groups registered in a block
<When adding groups>
6. or directly press the group name to select the group from the list of ALL GROUPS.
When changing the page, press the PREV or NEXT buttons.
7. Press the ADD button.
The selected group is added to the group entry list and deleted from the list of ALL GROUPS.
<When deleting groups>
8. or directly press the group name to select the group from the list of GROUP ENTRY.
9. Press the DEL button.
The selected group is deleted from the list of GROUP ENTRY and moved to the list of ALL GROUPS.
4 Saving the registrations and changes
10. Press the SET button. Press the Yes button on the confi rmation screen.
The block settings are saved. When you do not want to save the settings, press the No button.
Note
• If the BACK button is pressed, it returns to the previous screen.
• 1 to 9 groups can be registered in a block. In addition, the maximum number of blocks is 16.
• If any unconnected indoor units are registered with groups, "Communication Error" is displayed, and it
may affect to the communication of the entire system, and may result unintended operation. Be sure not
to register unconnected indoor units with groups.
• In the initial setting of GROUP DEFINITION, each indoor unit is registered with each predefi ned group.
However if unconnected indoor units are included, they must be removed from the groups one by one.
Therefore, when defi ning groups newly, deleting all predefi ned groups once with the "DELETE ALL DEF."
button and re-registering only the connected indoor units with the groups is comparatively easier than
changing predefi ned groups individually, and can prevent "Communication Error" from occurring.
– 14 –