Bluetooth Connection; Rear Panel - Ltc Audio ATM6000BT Manual De Uso

ENGLISH
OPERATION
•
Select a central location for the amplifier.
•
Connect the speaker wires (red & black) to the + and – terminals on the rear panel of the amplifier.
•
Connect the audio signal to the relevant sockets with the correct polarity.
•
Plug the mains lead in and switch the amplifier on once you have checked all connections.
•
Switch the audio sources on and adjust the master volume to the required level.
•
Karaoke: Plug a mic into MIC1 or MIC2 socket on the front panel. Before you use the mic, make sure that it
is switched off and the MIC volume button is set to the minimum. Connect the microphone, switch it on and
adjust slowly the volume and the echo.
•
If you don't use the unit any longer, switch the amplifier off and disconnect it from the mains.
Signal Sources and their Connections:
•
Connect a DVD-player or a CD-player to the terminal AUDIO INPUT or a data storage unit to the USB-interface
or insert a SD-memory card in the suitable slot or activate the Bluetooth function on your smartphone.
•
Select the active signal source by pressing the INPUT button until the desired input source is displayed.
•
Use the MP3 CONTROL-function for controlling the files on a connected data storage unit.
•
If you wish to use the karaoke function of this device, insert one or two microphones into MIC1 and MIC2.
Their signals are going to the signal output too.

BLUETOOTH CONNECTION

The ATM6000BT is only discoverable when the input selected is Bluetooth. After selecting Bluetooth input mode
on the ATM6000BT, turn on the Bluetooth function on the cell phone and search the ATM6000BT. Its Bluetooth
device name is "ATM6000BT". Pair and connect after search. There is no pairing code.

REAR PANEL:

6
1. Power supply: Connect the unit to the power outlet.
2. Main Speakers Outputs: Connect your speakers here to receive the signal from the ATM6000BT
3. LINE OUTPUT: Connect this jack to the input another amplifier or active speaker. The signal coming out
from this jack is passive and cannot be connected to another passive speaker.
4. DVD Input: Connect your DVD or CD or any other passive signal here.
5. AUX Input: Connect your DVD or CD or any other passive signal here.
6. FM Antenna: Connect your FM antenna here
SPECIFICATIONS:
Output Power: ....................................................................................................................................................... 2 x 50 W
Power supply: ................................................................................................................................... 220-240 V~ 50/60 Hz
Frequency Response: ................................................................................................................................... 20 – 20000 Hz
Input Sensitivity: .....................................................................................................................................................450 mV
Signal-Noise-Ratio (S/N): ........................................................................................................................................ ≥ 76 dB
Impedance: ....................................................................................................................................................................8 Ω
Microphone Input Sensitivity: ...................................................................................................................................20 mV
Dimensions ............................................................................................................................................430 x 200 x 65mm
Net weight ....................................................................................................................................................................2.0kg
FM frequency band .........................................................................................................................................87.5-108MHz
BT frequency band.......................................................................................................................................2402-2480MHz
Max. RF power ......................................................................................................................................................-2.97dBm
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmentally safe
recycling.
4
5 4 3 2
© Copyright LOTRONIC 2020
1
Made in China for LOTRONIC S.A.
Av. Z. Gramme 9 - B-1480 Saintes