babymoov Yoo-Feel Instrucciones De Uso página 13

B. RECEIVER
The 1440 mAh rechargeable Li battery is already installed in the receiver.
1. Plug the output jack of the adapter
to the USB port (15) making sure it is
properly positioned. Plug the adapter
into the wall socket.
N.B. before using the receiver for the first time, charge the battery for at least 3 hours.
Battery status and recharging
- Green: correct battery level.
- Red: battery low.
- Orange: receiver battery empty.
- Flashing green: battery recharging, receiver
turned on.
Changing the battery
If required or if you need to perform a reboot, unplug the adapter and open the battery compartment using a flat-head screwdriver
to change the battery.
N.B. Remember to disconnect the power adapter once the battery is completely recharged. To extend battery life and make it
last longer, do not leave the battery fully flat for long periods of time.
WARNING: ONLY USE THE ORIGINAL BATTERY OR ONE SUPPLIED BY THE DEALER. KEEP THE BATTERY OUT OF
REACH OF CHILDREN.
A. CHOICE OF LANGUAGE
1. Access the main menu
14
2. To turn on your receiver, press the
ON/OFF button
3 seconds.
STARTING THE APPLIANCE
2. Select 'Settings'.
.
Yoo-Feel BABY MONITOR • Instructions for use
3. The power light will turn green.
on the receiver for
3. Choose your language from English,
Battery level indicator: flashes
when the battery is very low.
MENU MENU Settings Settings
Key Tones Key Tones T T
ON ON OFF OFF
Time Time
Language
Français
French, German, Spanish
and Dutch.