Tanita KD-320 Manual De Instrucciones página 2

CAUTIONS
This scale is a precision instrument and must be used under certain conditions to
ensure accurate measurement. Please observe the following when using this
scale.
1.Never disassemble the unit.
2.Use in a vibration-free location that is not exposed to direct sunlight.
3. The scale will not measure accurately in an environment subject to
large temperature and humidity changes. The unit takes approximately
two hours to adjust to such changes.
4.Keep chemicals off the scale. Wipe with a damp cloth from time to time.
5.Do not use or store near heat sources(ovens, heaters, etc.).
6. When not used for a long time, remove the batteries and store the unit
in a dry, dust-free location.
7. Check and replace batteries before sending the unit for repair. If repair
is necessary, remove the batteries, repack the unit in the original
carton and protect with packing materials before shipment.
8.Do not leave objects on the weighing tray when the scale is not in use.
9. To avoid measurement error, do not measure while using equipment
that generates radio waves, such as mobile phones.
Notice:
These marks can be found out on contaminant-containing Batteries:
Pb Pb = Battery contains lead,
Cd Cd = Battery contains cadmium,
Hg Hg = Battery contains mercury.
Not allowed to mix batteries with consumer wastes!
As consumer you are legally bound to return used or discharged batteries. You can deposit your old
batteries at the public collecting points in your town, or wherever the corresponding batteries are
sold and specifically marked collecting boxes have been set up. In case of scrapping the apparatus,
the batteries should be removed from it and deposited at the collecting points as well.
2