SENSEA MIR 90/45 LED Instrucciones De Montaje página 51

MISCELLANEOUS AFTERSALES SERVICE, REPAIRS, GUARANTEE, ETC.
Have this appliance repaired by a qualified professional.
This electrical product complies with the safety standards in force. Repairs must only be
carried out by qualified technicians using original spare parts. Any failure to follow these
instructions can be particularly dangerous to users.
If necessary, contact the after-sales service of the store where you purchased this product.
Information for the external connection box:
• Connect the electricity supply to the terminal block, respecting the following connection
colour code:
- Connect the Brown Wire (Live) to the corresponding terminal marked L on the terminal
block.
- Connect the blue wire (Neutral) to the corresponding terminal marked N on the terminal
block.
• Attach the mirror to the wall.
• Turn the electricity supply back on and switch on the luminaire. Your luminaire is now ready
to be used.
Make sure the supply cord through the tube, Tighten the screws. Prevent the basic
insulation wire from beining exposed the outside of terminal block box.
51
EN