MIRKA MIRO 955 Instrucciones De Manejo página 10

The vacuum cleaner:
Ensure that you have a bag installed in your vacuum cleaner which is approved and rated for
drywall dust.
WARNING: Failure to use an approved dust bag in your vacuum will increase the level of
airborne dust in the work area. Prolonged exposure to such dust may cause respiratory
harm.
STARTING AND STOPPING TOOL
Switching the machine on and off
To switch on:
While holding with the left hand on the column and the right hand on the main handle, Press
the rocker switch to the right with the thumb of the right hand. Anticipate and be ready for the
start up torque when the machine first starts. fi
To switch off: ff
Press the rocker switch to the left. After the machine has been switched off , the sanding disc ff ff
will still rotate for a time. Take care that parts of your body do not come into contact with the
disc and do not set the machine down while it is still rotating!
Adjusting the rotation speed:
The speed of the machine is variable to suit diff erent tasks. It can be adjusted from 650/min up ff ff
to 1600/min by using the thumb wheel. Using the right thumb, turn in the downward (coun-
terclockwise) direction to increase the speed and in the upward (clockwise) direction to de-
crease the speed. Generally, you should use the higher speed for fast stock removal and the
lower speed for more precise control.
10