Technical Specifications - Hudora Square 120 Instrucciones De Montaje

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral com-
ponent of the product. Therefore, please store them and the packaging carefully
in case questions arise in the future. Please always include these instructions
when giving the product to a third party. This product must be assembled by
an adult. This product is not designed for industrial use. The use of the product
requires certain capabilities and skills. Always adjust according to the age of the
user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Aluminium Nest Swing Square 120
Item No.: 72158 | 72159
Maximum carrying capacity: 120 kg
Dimension: ca. 118 x 80 cm
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Nest swing
1 x Manual
Other parts which may be included with the delivery in some circumstances are not
required.
SAFETY INSTRUCTION
• WARNING! Only for domestic use.
• WARNING! Only use under direct supervision of an adult!
• WARNING! Not suitable for children under 36 months old. Danger of falling!
• WARNING! Not suitable for children under 36 months old due to long cords!
Strangulation hazard.
• The owners of the swing as well as the competent supervisory personnel are
responsible for ensuring that all users follow the instructions in the operation
manual.
• Do not make any technical modifications.
• Changes to the original product must only be carried out according to manu-
facturer specifications.
• No one is permitted to gain access to the swing area during use.
• Never stand or kneel on the swing.
• Always hold yourself firmly with both hands.
• No objects of any kind must be in the vicinity of the swing zone (trees, walls,
fences, clotheslines).
• Make sure that you have a safety clearance of at least 2 m (front and back)
beyond the maximum reach of the swing and make sure the ground is level
and shock absorbing (e.g. grass) without any sharp edges or pointed objects,
obstacles, inclines, levels, steps or hard surfaces (e.g. concrete) etc.
• Clearance to stationary components on the side, such as the swing scaffol-
ding must be at least 40 cm.
• Maximum raised height must not exceed 2.5 meter as measured from the
ground.
• Swinging components, such as a neighboring swing must be placed at a
distance of at least 60 cm.
• In idle mode, the swing must be at 40 cm from the ground.
• You should never install a swing in such a way that the user could be blinded
by sun rays.
ASSEMBLY INSTRUCTION
Prior to installation, carefully select and check the location where you will install
the swing. Please make sure that the swing carrier is adequately stable. Please
also take into account that swinging produces centrifugal forces that can put
a lot of strain on the swing carrier. Please consult an expert (statics expert,
architect, carpenter) and ask how much load your swing carrier can tolerate.
Suspension connectors shall be of a design that will prevent unintentional dis-
connection.
All images are examples of the design.
After removing the product from its packaging, please check it for complete-
ness. Please thereby note that most items are pre-assembled. You only need
to unfold the two U-frames (1) apart and to stick the upper and lower ends
together, as shown in figure B. Press in the two locking mechanism knobs with
your thumb, until the frame tubes easily slide into each other. Turn the U-frame
until the locking mechanism knobs appear in the locking mechanism openings
that are provided for this purpose and audibly engage. Check for the correct
positioning of both U-frames by dragging both outwards. In the event that the
latter no longer move, they have been mounted according to the instructions.
HANGING DEVICE AND ADJUSTMENT
The hanging points must be at least as far apart as the swing seat + 100mm.
The swing is packaged with two ropes and adjustment eyelets (4), so that the
height of the swing can be variably aligned with any suitable hanging device.
The swing rope (6) can be lengthened or shortened by pushing or pulling it
through the adjustment loops (4). The hanging swing can now be individually
adjusted. No one should sit on the swing while making the adjustments. When
extending or reducing the length of the swing ropes please make sure that the
ropes remain equally long at all times. If the lengths of the ropes differ, this will
lead to circular pendulum movements of the swing. Make sure that swing is set
up in such a way that the person using the swing cannot reach the ground with
the tips of his or her toes. If in doubt, perform a few gentle test swings.
PRODUCT RECOMMENDATION
You can use this nest swing together with the HUDORA Playground (64019).
In order to comply with the necessary suspension width (minimum swing seat
width + 100 mm apart), it is necessary, on the one hand to un-mount the two
board swings and on the other hand to use their respective outer support hooks
for the nest swing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and
after each use. Do not make any structural changes. For your own safety, please
use original spare parts only. These can be sourced from HUDORA. If parts be-
come damaged or if sharp edges or corners should develop, the product may not
be used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
You should also replace all the plastic parts after a maximum of 5 years to
prevent a possible failure of these parts. The constant exposure to sunlight can
lead to fading of the color, due to UV light that has however no hazardous safety
aspect. If the product is used outdoors you should dismantle it when it is not in
use, especially in winter, in order to prevent premature fading of the colours and
corrosion, and to extend its service life.
Check the product for damage or traces of wear and tear before and after each
use.
We also recommend before each use:
• to check for the firm sitting of nuts and bolts, tighten if necessary
• to lubricate moving parts in order to minimize wear.
• to check all covers of screws and sharp edges and replace if necessary
• to replace defective parts according to the manufacturer's instructions
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point in your area. Local waste management companies will be able to answer
your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information
on the product, replacement parts, solutions to problems and lost assembly
manuals at http://www.hudora.de/service/.
4/8