Technical Specifications - Hudora All Stars 205 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private / domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Basketball stand All Stars 205
Item number: 71653, 71655, 71656/01
Height-adjustable: 165 – 205 cm
Purpose: Portable training rack for basketball throwing exercises.
If you have assembly problems or would like further information on the product, we
have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Basketball stand (cf. parts list on page 2) | 1 x These instructions
Other parts which may be included with the delivery in some circumstances are not
required.
GENERAL TRAINING PRINCIPLES
1. Warm up:
Warm up before each training session. Walking or running on the spot and light
stretching exercises are excellent for warming up.
2. Breathing:
Correct breathing plays an important role in training. Breathe calmly and evenly.
Never hold your breath while training.
3. Clothes and space:
Wear comfortable sports clothing when training. Always wear sports shoes; never
train in bare feet, sandals, socks or tights.
4. Warm down:
Use light stretching to warm down again after training. This allows the pulse to drop
slowly and allows the body to regenerate itself more quickly for the next session, as
the decomposition of metabolic wastes (lactates) is better achieved through carrying
out these movements at the end.
5. Health:
Stop the exercise program immediately if you feel a tightening in your muscles or any
general pain when carrying out the exercises. For your own safety, please contact a
doctor.
USE: Make sure this piece of equipment is positioned securely and firmly. Adjust the
length of time you train to your capacities and do not over-exert yourself.
WARNING: As a matter of course, you should consult your doctor before starting the
training.
SAFETY INSTRUCTIONS
• This training equipment is NOT a toy! Use the basketball stand for its intended
purpose only.
• This piece of training equipment is only suitable for private use. If it is used
commercially, any guarantee is invalidated.
• Warnings! The stand must be properly secured at all times to prevent toppling.
• Place the basketball stand on a firm and level surface and make sure this piece of
equipment is positioned securely and firmly.
• Always fill the base with sand (or water) so that the stability of the basketball stand
is assured and it won't fall forwards. We would recommend filling the base with
sand rather than water as water will flow out if there is a hole. This could cause the
product to fall over and cause damage to objects or injury to people.
• Check that all connections have been tightly fastened before using the basketball
stand and check again later!
• Before each use, check that the basketball stand is set up correctly and never use
it if it is not working properly.
• Check the basketball stand regularly for defective parts and replace them. Use
original spare parts only.
• Do not climb up the basketball stand.
• Do not hang off the basket or make slam dunks, the basketball stand could tip
over.
• Never allow children to play in the immediate proximity of this piece of training
equipment without supervision and never let them assemble it.
• Never use the basketball stand near water or leave it outside in the rain.
• Wear suitable clothing when training. The clothes must be constituted in such a
way that they cannot catch in anything during the training due to their fit.
• Always wear training shoes, and never train in bare feet, or when wearing sandals,
socks or stockings.
• Never wear jewellery which could catch in the basketball basket.
• If you start to feel unwell, discontinue training immediately.
• When permanently irradiated with UV light, the material ages significantly faster.
To avoid premature aging and thereby extend the service life, you should always
store the product in a dry and dark place when not in use. Do not permanently
expose the product to wind, moisture, extreme temperatures or sunlight.
All images are examples of the design.
TOOLS REQUIRED
• 8 mm hexagonal wrench
• 13 mm hexagonal wrench
• hammer (not supplied)
• Screwdriver (not supplied)
INSTRUCTIONS ON ASSEMBLY
Step 1: Use a pencil to mark the lower vertical tube (7) at the conical end at a height
of 6 cm. Slide the middle vertical tube (6) with high physical strength as far as
possible onto the lower vertical tube. Make sure that the drill holes in the lower tube
(7) and the outer threads of the middle tube are aligned. The fully assembled
middle tube should cover the marking so that this is no longer visible. (Fig. 1)
Step 2: Place the connected tubes at the intended position on the base-moulded
part (8). The middle thread at the upper end of the middle tube (6) must be aligned
towards the rear. Slide the axle (9) through the wheels (10) as well as through the
drill holes in the lower vertical tube (7) and the base-moulded part (8). (Fig. 2)
Step 3: Connect the base-moulded part (8) and the lower vertical tube (7) with the
two diagonal struts (11 + 12). Use the screws (17) and the flat washers (22) on the
base, the screw (15) and the flat washer (23) as well as the nut (21) on the lower
vertical tube. (Fig. 3)
Step 4: Fill the base-moulded part (8) with sand (or water) and close it with the cover
(13). (Fig.4)
Step 5: Mount the net (3) on the basket ring (2). (Fig. 5)
Step 6: Connect the basket ring (2), the board (1) and the rear connection tube (4) with
each other. You should for this purpose use the screws (14), flat washers (19) and nuts
(20). (Fig. 6)
Step 7: Loosen the grub screw (16) of the connection tube (4) and mount it toge-
ther with the basket and board on the upper vertical tube (5). You should for this
purpose use the screw (18), flat washer (23) and nut (21). Ensure that the groove
(recess) in the upper tube (5) is aligned to the rear (Fig. 7). Then firmly retighten
the grub screw (16) of the connection tube.
Step 8 – Height adjustment: Loosen the grub screw (16) of the middle tube (6) and
insert the upper vertical tube (5) to the desired height into the middle tube (6). Then
firmly retighten the grub screw (16). The height of the basket can be steplessly
varied between 165 cm and 205 cm. Make sure that the upper tube is inserted at
least 17 cm into the middle tube in the fully assembled condition. The marking line
on the upper tube should thereby not longer be visible. (Fig. 8)
WARNING: The height of the basket ring must never exceed 205 cm from the ground.
WARNING: Never use the basketball stand without first having filled the base
section with water or sand.
TRANSPORTING THE STAND
Grasp the central post with both hands and fix the base with your left foot. Tilt the
basketball stand towards you until you can move it using the mounted wheels. Once
you have transported the stand to where you want it, return it carefully to an upright
position.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be used
any more. If in any doubt, please contact our service team (http://www.hudora.de/).
Store the product in a safe place where it is protected from the elements, cannot be
damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point in your area. Local waste management companies will be able to answer your
questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information on
the product, replacement parts, solutions to problems and lost assembly manuals
at http://www.hudora.de/.
8/16