Technical Specifications - Hudora Chicago 260 Instrucciones De Montaje Y De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component
of the product. Therefore, please store them and the packaging carefully in case
questions arise in the future. Please always include these instructions when handing
on the product to a third party. This product must be assembled by an adult. This
product is designed for private/domestic use only. This product is not designed for
commercial/industrial use. The use of the product requires certain capabilities and
skills. Always adjust according to the age of the user and use for the purpose it has
been designed for.

TECHNICAL SPECIFICATIONS:

Item:
Basketball stand Chicago 260
Item number:
71663, 71658
Height-adjustable: 206 – 260 cm
Purpose:
Portable training rack for basketball throwing exercises.
If you have assembly problems or would like further information on the product, we
have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Basketball stand (cf. parts list on page 2) | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not required
for the installation and use of the product.
GENERAL TRAINING PRINCIPLES
1. Warming up:
Warm up before each exercise routine. Walk or run in place, stretch or light ca-
listhenics as a warm-up before using the home trainer.
2. Respiration:
The correct respiration plays an important roll in training. Breathe quietly and uni-
formly. Never stop breathing during training.
3. Clothing and place:
Dress in comfortable clothing during training and see that you have a sufficient place
for the execution of the exercises. Always wear sport shoes, do not train with bare
feet, sandals, or stockings.
4. Cooling down:
Cool yourself down after the training with easy stretching or calisthenics. This
way your heart rate can slowly decrease and the body can regenerate more quickly
for the next exercise routine because the metabolic waste (Lactate) can be more
efficiently disposed of with slow cool downs.
5. Health:
Quit your exercise immediately if you notice a pulling in the muscles or general pain
as you practice. Contact a physician for your safety.
USE: Ensure that the equipment is in a firm and stable position. Adapt the training
time to your performance capabilities, and do not over-tax yourself.
WARNING: As a matter of course, you should consult your doctor before starting to
train.
SAFETY INSTRUCTIONS
This training equipment is NOT a toy! Use the basketball stand for its intended
purpose only.
This piece of training equipment is only suitable for private use. If it is used
commercially, any guarantee is invalidated.
Warnings! The stand must be properly secured at all times to prevent toppling.
Place the basketball stand on a firm and level surface and make sure this piece of
equipment is positioned securely and firmly.
Always fill the base with sand (or water) so that the stability of the basketball stand
is assured and it won't fall forwards. We would recommend filling the base with
sand rather than water as water will flow out if there is a hole. This could cause the
product to fall over and cause damage to objects or injury to people.
Check that all connections have been tightly fastened before using the basketball
stand and check again later!
Before each use, check that the basketball stand is set up correctly and never use
it if it is not working properly.
Check the basketball stand regularly for defective parts and replace them. Use
original spare parts only.
Do not climb up the basketball stand.
Do not hang off the basket or make slam dunks, the basketball stand could tip
over.
Never allow children to play in the immediate proximity of this piece of training
equipment without supervision and never let them assemble it.
Never use the basketball stand near water or leave it outside in the rain.
Wear suitable clothing when training. The clothes must be constituted in such a
way that they cannot catch in anything during the training due to their fit.
Always wear training shoes, and never train in bare feet, or when wearing sandals,
socks or stockings.
Never wear jewellery which could catch in the basketball basket.
If you start to feel unwell, discontinue training immediately.
When permanently irradiated with UV light, the material ages significantly faster.
To avoid premature aging and thereby extend the service life, you should always
store the product in a dry and dark place when not in use. Do not permanently
expose the product to wind, moisture, extreme temperatures or sunlight.
All images are examples of the design.
TOOLS REQUIRED
• 8 mm Allen key
• 13 mm Allen key
• Hammer (not supplied)
• Spirit level (not supplied)
• Cross-head screwdriver
ASSEMBLY INSTRUCTIONS
Step 1: Place the lower vertical tube (9) on the basemoulded part (10) at the intended
position. Slide the axle (11) through the wheels (12) as well as the drill holes in the
lower vertical tube and in the basemoulded part (Fig. 1)
Step 2: Connect the base -moulded part (10) with the two lower diagonal struts (13 +
14) and the lower vertical tube (9). You should for this purpose use the screw (20) on
the base -moulded part, the screw (17) on the lower vertical tube, as well as on both
screw flat washers (24) and nuts (25). (Fig. 2)
Step 3: Fill the base-moulded part (10) with sand (or water) and close it with the cover
(15). (Fig. 3)
Step 4: Loosen the two grub screws (18) of the lower vertical tube (9) and insert the
middle vertical tube (8) into the lower tube. Make sure that the middle grub screw of
the middle tube is aligned backwards. Then firmly retighten the grub screw (18) of the
lower vertical tube (9). (Fig. 4)
Step 5: Mount the net (3) on the basket ring (2). (Fig. 5.1 and 5.2)
Step 6: First insert the plastic washers (26) from the rear side into the 4 drill holes on
the bottom side of the basket board. Then connect the basket ring (2), the board (1)
and the upper vertical tube (7) with each other. You should for this purpose use the
screws (16), flat washers (22) and nuts (23). (Fig. 6)
Step 7: First insert the plastic washers (26) from the rear side into the upper 3 drill
holes of the basket board. Connect the board (1) and the upper vertical tube (7) from
the bottom up in the order 4, 5, 6 with the diagonal struts. You should for this purpose
use on the board the screws (21), flat washers (22) and nuts (23), on the top tube, the
screw (19) as well as flat washer (24) and nut (25). (Fig. 7)
Step 8 – Height adjustment: Loosen the grub screw (18) of the middle tube (8) and
insert the upper vertical tube (7) to the desired height into the middle tube (8). Then
firmly retighten the grub screw. The height of the basket can be steplessly varied
between 206 cm and 260 cm. Make sure that the upper tube is inserted at least 11 cm
into the middle tube in the fully assembled condition. The marking line on the upper
tube should thereby not longer be visible. (Fig. 8)
WARNING: The height of the basket ring must never exceed 260 cm from the ground.
WARNING: Never use the basketball stand without first having filled the base section
with water or sand.
TRANSPORTING THE STAND
Grasp the central post with both hands and fix the base with your left foot. Tilt the
basketball stand towards you until you can move it using the mounted wheels. Once
you have transported the stand to where you want it, return it carefully to an upright
position.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use.
Do not make any structural changes. For your own safety, please use original spare
parts only. These can be sourced from HUDORA. If parts become damaged or if sharp
edges or corners should develop, the product may not be used any more. If in any
doubt, please contact our service team (http://www.hudora.de/). Store the product in
a safe place where it is protected from the elements, cannot be damaged, and cannot
injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point
provided in your area. Local waste management companies will be able to answer
your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put
just as much effort into rectifying them. Therefore, you can find numerous infor-
mation on the product, replacement parts, solutions to problems and lost assembly
manuals at http://www.hudora.de/.
8/16

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7166371658

Tabla de contenido