Snmp Parameters; Updating The Firmware - Gorgy Timing RADIO TIMING 9S Modo De Empleo/Instrucciones De Montaje

You can enter the MD5 keys used by the NTP client or server modules in the lower part of
the page.

5.8. SnMP PaRaMEtERS

Here you can enter information specific to the SNMP protocol for monitoring the RT9s as
well as the addresses to which the alarms (traps) will be sent.

5.9. UPDatInG tHE fIRMwaRE

Before starting the update, it is preferable to back up the relays
programming calendars if the rt9s has them (see Section 6.6.
BaCKINg up CaleNDarS).
Depending on the new features, the relay programs may be lost.
MDE-RT9s-3079V1.0 109