noTe
for Windows Vista or Windows 7 users, it is recommended to run the pro-
gram as administrator. To do so, right-click the shortcut, and select "run as
administrator". if the program is not run as administrator, the automatic setup
can fail.
2.4.3. Setting the IP address
Each device connected to a computer network should have an address for it to commu-
nicate with the other network components.
(IP address: Internet Protocol).
As a network component, the RT9s must have an IP address. It can use an IP address
that the user assigns manually to it or obtain an address automatically.
By default (factory setting), the RT9s obtains an IP address automatically via a DHCP
server.
►
These settings can be defined via the interfaces on the front of the product (see
"3.5. Configure IP address").
►
If you have access to the web interface, you can also edit these settings on the
"Network settings" page (see section 5.4. Calendar settings).
2.5. SEttInG UP MOzILLa SUnBIRD
☛
this section deals only with rt9s equipped with relay outputs.
MDE-RT9s-3079V1.0
►
Choose the language.
79