GB
"Cappuccinatore" is a water heater fitted with an emptying out reservoir which delivers
a timed quantity of steam through an extraction nozzle.
Voltage:
230V 50 Hz (cod. M50010)
120V 60 Hz (cod. M51010)
Total power output: 1250 W
The weighted equivalent continuous sound pressure (A) is less than 70 dBA
(89/392/CEE Att. 1 ch. 1.7.4F).
Carefully read all the instructions in this manual before using the machine.
Do not operate the machine or carry out ordinary maintenance before reading and
understanding the instructions contained in this manual.
The steam delivered by the extractable nozzle is very hot. Do not expose yourself to
the steam jet directly, an incorrect use of the machine may be dangerous.
Do not let children use the machine.
Do not touch the hot surfaces.
Keep the enclosed instructions.
Improper machine use during operation, cleaning or maintenance can cause damage.
Before connecting the machine to the mains, make sure the following conditions are
complied with:
1) Flat, stable horizontal support surface.
To work properly the "Cappuccinatore" machine needs to be positioned on a
sufficiently stable horizontal surface to avoid it tipping up or falling accidentally.
2) Good air circulation.
The "Cappuccinatore" machine gets hot so it must therefore be positioned in a quite
large environment to avoid overheating.
Do not put the machine near electric or gas radiators or inside hot ovens.
TECHNICAL SPECIFICATIONS
Overall dimensions 31 x 35 x 28 cm
Weight approx 8Kg (17.6 lb)
Tank capacity approx 1500 cc (0,4 gal)
CAUTION
IMPORTANT SAFETY INFORMATION
10