EN
IT
Problem encountered
Cold whipped milk: beverage
preparation hot
On/Standby button red warning light
with acoustic signal emitted when
preparing a milk-based beverage.
Contact Lavazza Customer Service for any problem or failure not included in the above list.
• Power supply: 220-240V / 50-60Hz
• Nominal power : 1500W
• Dimensions:
Height
280 mm 145 mm 380 mm
11.02 in
TROUBLESHOOTING
Possible causes
» Wrong access procedure for the
whipped cold milk beverage.
» Products other than milk (e.g.
powders) have been used.
TECHNICAL SPECIFICATIONS
Width
Depth
5.70 in
14.96 in
» Repeat the access procedure by
keeping the "Temperature boost"
button depressed until the icon turns
BLUE (as shown in page 63 of the
Manual).
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
Use only milk to prepare the beverages
supplied by the machine.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
• Weight: 4,5 kg (8,81 lb)
• Water tank removable type: 1,1 L (38,71 oz)
• Housing materials: Thermoplastic
• Cable Length: 0,8 m (31.49 in)
78
Solution