5. Operating conditions
Respect the limits of pressure and temperature indicated on the
cylinder label plate.
Warning!
During installation always take care to fi ll fi rst the domestic
hot water inner tank before fi lling with heating water the
main cylinder (buffer).
In working operating conditions always avoid that the
pressure of the buffer exceed the one of the DHW inner tank
more than 1.5 bar
6. Waste disposal
At the end of the product's technical life, its metallic
components must be handed over to operators
authorised for collecting metallic materials for
recycling. The non-metallic components must
be given to operators authorised for their waste
disposal. If disposed by the fi nal user, the
products must be managed as urban waste, and
therefore complying with regulations in force in
that place In any case they must not be treated as household
waste
BS_100_Rev_1
GB
CORDIVARI - 8