Manta STEADYCAM ACTIVE TS Manual De Usuario página 16

Keys/Indicators Function
1. when camera is operating, LED indicator maintains on.
Working indicator
2. when the camera is video recording, LED flashes.
WIFI indicator When open WIFI, theLED light flashes. After connecting WIFI, the LED light is on.
START TO USE
CHARGE THE DETACHABLE LI-ION BATTERY
1. First connect the power adopter to the USB, then connect USB plug to the camera USB to charge.
2. Power off the camera, get the camera charged by connecting to PC.
3. The LED charging indicator is on. After finishing charging, the indicator turns off. Normally, it takes 2-4 hrs to finish charging.
4. Please use the DC charger for equipment, specifications: DC5V - 1.5A)
HOW TO USE MEMORY CARD
The camera supports the memory card of 64 GB max. It doesn't support hot plug. A high speed memory card of above C10 is suggested to be used.
A memory card must be inserted into the camera before using. After inserting the memory card, make sure to format the memory card on the
camera first.
1. Insert the memory card as indicated by the icon into the slot until the card totally inside.
2. To remove the memory card, gently press the edge of the memory card until it pops out.
Note: The camera doesn't have built-in memory. A memory card must be inserted into the camera before using. After inserting
the memory card, make sure to format the memory card on the camera first.
EN – MM9359TS
15