Cleaning And Maintenance - cecotec Ready Warm 6000 Ceramic Manual De Instrucciones

4. OPERATION
SYMBOL FUNCTION
O WHEN THE KNOB POINTS 0, THE
APPLIANCE WILL TURN OFF
FAN (WHEN THIS LEVEL IS
SELECTED, THE APPLIANCE WILL
PRODUCE COLD AIR.)
I THE APPLIANCE WILL HEAT AT
LOW POWER. (750 W)
II THE APPLIANCE WILL HEAT AT
MÁXIMUM POWER. (1500 W)
• This heater includes 3 different power levels
• The temperature can be adjusted from 0 to 40 ºC by turning the temperature knob
anticlockwise (-) or clockwise (+).
RESETTING THE HEATER
WARNING: the appliance includes a thermal-overload protector to prevent overheating. When
the product reaches extreme temperatures, it will automatically switch off and will resume
operation only when it is reset.
In order to reset the heater:
1. Unplug the product from the power supply and wait for 5-10 minutes approx.
Allow it to cool down.
2. Turn the product on again and operate normally.

5. CLEANING AND MAINTENANCE

1. Always turn off, unplug and allow the appliance to cool down before cleaning.
2. Do not use abrasive scouring pads, powders or cleaners to clean the product.
3. Use a soft, dampened and clean cloth to clean the product's outer housing.
4. If the heater is not going to be operated for a long period of time, store it in a dry and safe
place where it is protected from dust.
05307_Ready Warm 6000 Ceramic _ Manual_EA.indd 9
ENGLISH
READY WARM 6000 CERAMIC 9
18/7/18 16:00