Hema 80.06.0001 Manual De Instrucciones página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CONTROL PANEL
Switch knob
OFF: Stop
1: Fan with low speed
2: Fan with medium speed
3: Fan with high speed
1
2
3 ------- Fan+ Oscillation
80°
Rotation angle:
CARE AND CLEANING
CAUTION: ALWAYS UNPLUG THE PRODUCT FROM THE ELECTRICAL OUTLET PRIOR TO CLEANING IT.
1.
Do not use the product in oily or dirty areas, as the air vents may become blocked.
2.
Clean the plastic parts with a mild soap and a damp cloth or sponge.
3.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
4.
Periodically check the screws on the product to ensure they are securely tightened.
5.
Store the product in a cool, dry place.
Environment
In compliance with the directives on Waste Electrical and Electronic Equipment, this product must not be
discarded with domestic waste but should be disposed of separately for recycling. If you wish to dispose of this
product in the future, do NOT throw it away with the household rubbish but hand it in at a specially designated
place, such as your municipal domestic chemical waste depot.
Quality
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in terms
of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product quality in
collaboration with the manufacturer.
Security
This HEMA item may be fitted with a plastic anti-theft strip. You will find the strip on the bottom of the product.
This strip does not influence the quality or the operation of the product and can be removed without a problem.
Faults and repairs
If this device needs to be repaired, you can hand it in at a HEMA branch after packing the product securely. Do
not try to repair this product yourself. For repairs that fall within the warranty period, you will need to show a
proof of purchase and the warranty document. Regularly check the power cord for damage. If there is any damage
to the cord set, please return the item to a HEMA branch for repair. Do not try to replace it yourself. For safety
reasons we recommend that you do not carry out any repairs to an electrical device yourself.
Warranty conditions
- 17 -

Publicidad

Tabla de contenido
loading

Tabla de contenido