Night Setback Mode; Adjusting The Airflow Direction - Technibel CA 250 X5 TA Instrucciones De Uso

4. Night Setback Mode

In Cooling Mode:
5. Adjusting the Airflow
Direction
CAUTION
14
Operation with the Remote Control Unit
(continued)
Night Setback Mode is used for saving energy.
Press the NIGHT SETBACK button while operation.
The mark appears in the display.
To release the night setback function, press the NIGHT SETBACK button
again.
( )
When the night setback mode is selected, the air conditioner
automatically raises the temperature setting 1 °C when 30 minutes
have passed after the selection was made, and then another 1 °C
after another 30 minutes have passed, regardless of the indoor
temperature when night setback was selected. This enables you to
save energy without sacrificing comfort. This function is convenient
when gentle cooling is needed.
Setting
temperature
Confirm that the remote control unit has been turned on. Press the FLAP
button to start the flap moving up and down (
the flap movement and to direct the air in the desired direction, press
the FLAP button again.
Do not move the flap with your hands.
ON I /OFF
OFF ON
MODE
CLOCK
FLAP HH
1 °C
30 min.
Press the
NIGHT SETBACK
button
ON I /OFF
OFF ON
MODE
CLOCK
FLAP HH
FAN SPEED MM
SELECT TIME SET
BATTERIES
NIGHT
SETBACK
TIMER
SELECT
1 °C
30 min.
T ime
NIGHT
SETBACK
TIMER
SELECT
A/C
ACL
SENSOR
). If you want to stop