Reverse Door - VOX electronics KS1110F Manual De Usuario

Reverse Door

Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
•
Ensure the unit is unplugged and empty.
•
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that
it will not slip during the door reversing process.
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It's better that 2 people handle the unit during assembly.
1. Remove the top right hinge cover
2. Undo the screws. Then remove the hinge bracket.
3. Remove the top left screw cover.
4 Move the core cover from left side to right side. And then lift the upper
door and
place It on a padded surface to prevent
It
from scratching.
11