Fusion Shear C302-S2 Manual De Instrucciones página 11

3. To select the fast speed slide it further
forwards (4g).
4. After use, slide it backwards (4h) to
switch the appliance off.
Caution! Damage due to incorrect
power supply.
f Only operate the appliance
with the voltage stated on the
nameplate.
Overload protection (Fig 4.)
The appliance includes an overload
protection fuse that will switch the motor
off if the blades become jammed. If the
overload protection fuse has activated,
check the blades and fleece for blockages.
Clear any obstructions and replace any
damaged blades.
To reset the overload protection fuse, slide
the switch backwards past the off position
(4j).
Switch position 0 = Off
Switch position I = Normal speed
Switch position II = Fast speed
Switch position ↻ ▼ ↺ = Reset
Maintenance
Warning! Injuries and material
damage due to incorrect handling.
f Switch off the appliance and
disconnect it from the mains
before cleaning it or performing
any maintenance.
f It is particularly important to keep
plug and cable clean, dry and in
order at all times.
Filter cleaning (Fig. 5)
Caution! Motor damage due to
blockages.
f The motor will overheat if the filter
is blocked.
2047_Artwork for 109-11660 - 01 - Instructions Fusion Shear 240V_EU__V2.indd 11
f Never run the appliance with the
filter removed as wool / hair will
enter the motor.
Regularly check and clean the filter (5a).
Pull up on the tab (5b) to remove it. Hold
it up to the light to check the wire mesh for
blockages. Wipe or brush away any dirt
and debris (5c). Ensure the filter is clean
and dry before refitting.
Gear lubrication (Fig. 6)
After every 100 hours use, remove the
gearbox covers (6a) and wipe away hair
and used grease from the gear wheel
(6b). Check for wear and broken teeth.
If required, remove the shear-head (6c).
Re-coat the gears with clean grease (R2 or
equivalent). Refit shear-head and gearbox
covers before operating.
Cleaning and care
Danger! Electric shock due to
penetration of liquid.
f Do not immerse the appliance in
water!
f Do not allow any liquid to get
inside the appliance.
f Only reconnect the appliance to
the power supply if it is completely
dry.
Caution! Danger from aggressive
chemicals.
Aggressive chemicals could damage
the appliance and accessories.
f Never use solvents or scouring
agents.
f Only wipe the appliance with a
soft, slightly damp cloth.
Wipe the handle with a soft cloth. Use a
brush to remove dirt from the shear-head.
Remove the blades for cleaning, and oil
them before storage.
ENGLISH
en
de
fr
it
es
pt
nl
da
sv
no
fi
pl
hr
sk
hu
ro
el
ru
ar
11
10/10/2018 13:05