HJM CORT411 Instrucciones De Uso página 20

Cortafiambres CORT411_Maquetación 1 06/06/14 16:39 Página 20
PREPARING TO SLICE
1. Unwrap cord from bottom of slicer, and slide into slot, Position sli-
cer on a clean, dry and smooth surface. Fold down platform, remo-
ve food collection tray from its storage position and put it under the
blade at the back to the food slicer.
2. Place food carriage on platform. The ridge on bottom of food
carriage should fit into slot of platform properly. Move food carria-
ge back and forth a few times to ensure movement.
3. Place food pusher on back of food carriage.
4. Select the required slice thickness by turning thickness adjusting
knob clockwise for thicker slices and counter- clockwise for thinner
slices.
OPERATION
CAUTION:ALWAYS USE FOOD CARRIAGE AND
FOOD PUSHER
1. Plug into 220-240 volt AC outlet.
2. Place food to be sliced on food carriage and press it against thick-
ness guide. Then pull food carriage toward you by left hand.(fig. 2)
fig.1
- 20 -
fig.2
E
N
G
L
I
S
H