Publicidad
Idiomas disponibles
Idiomas disponibles
SF 3345
• Disconnect the plug when moving from one location to
another.
• Be sure fan is on a stable, even surface when operating
to avoid overturning.
• DO NOT USE fan in window. Rain may create an
electrical hazard. Do not leave the fan operating
adjacent to an area where water has been collected to
avoid the potential of electrical hazard.
INTRODUCTION:
The Stand Fan features three speeds, a swivel action head giving a smooth oscillation action along with low
noise levels, low electrical usage, reliability with safety, while still providing efficient air flow.
OPERATION
The power switch is incorporated in the speed control switch on the top of the fan.
0- The Fan is switched Off
1- The Fan operates at the lowest speed
2- The Fan operates at the medium speed
3- The Fan operates at the highest speed
● The fan can operate in oscillation or static mode.
● To make the fan head oscillate, push down the Oscillation Knob.
● To stop the fan head from oscillating pull-up the Oscillation Knob.
● The head of the fan can be adjusted up or down, to do this loosen the adjusting knob,
adjust the fan to the desired angle to secure tighten the adjusting knob.
PART NAME:
1. Front guard
2. Fan blade
3. Locking nut
4. Fan Blade screw
5. Fixation screw
6. Rear guard
7. Motor Shaft
8. Speed control
9. Fan Motor
10. Mains Lead
11. Knob
12. Inner Tube
13. Height adjustement screw
14. Outer tube
9
Publicidad
