brennenstuhl 1507450 Instrucciones De Uso página 18

4. Press any key on the remote control (5). The function indica-
tor light (6) illuminates when the key is pressed.
3
If the function indicator light (6) does not light up when a
key is pressed the device is not receiving any power from
the battery. Check whether you have inserted the battery
correctly.
Synchronising the radio channels
Before using the devices for the fi rst time the radio channels
must be synchronised to enable all socket switches to react to
the radio signal of the remote control.
Moreover, each socket switch must be assigned a frequency of
a key pair on the remote control to enable it to be operated
individually.
3
Adjust the DIP switches using a suitable object, for
instance a small screwdriver, by pushing them down or
up.
Setting a radio channel on the remote control
1. Remove the cover (8) of the battery compartment (10).
2. Set a radio channel using DIP switches 1 to 5 (11).
3. Close the battery compartment (10).
18