Main Features - Fulbat Fulload 1500 Manual De Instrucciones

EN
INSTRUCTION MANUAL
LEAD ACID COMPATIBLE: AGM, WET, CALCIUM, GEL & VRLA
This manual contains important safety and operating instructions
for 12V battery charger: Fulload 1500.
IMPORTANT SAFETY INSTRUCTIONS. Please read this manual and
follow the instructions carefully before using the charger.
WARNING
1. The charger is designed to charge 12V lead-acid batteries from
4Ah to 30Ah. However, charger can maintain batteries up to 120Ah.
2. We always recommend that you check the Battery Manufacturers
specifications before using this charger.
3. Explosive gases may escape from the battery during charging.
Provide ventilation to prevent flames and sparks.
4. For indoor use. Do not expose charger to rain, snow or liquids.
5. For charging lead-acid batteries ONLY (of the size & voltage indicated
in the specifications table).
6. Battery acid is corrosive. Rinse immediately with water if acid
comes into contact with skin or eyes.
7. The charger should be used on a flat surface.
8. Never charge a frozen battery.
9. Never charge a damaged battery.
10. Never place the charger on the battery while charging.
11. Be extra cautious to reduce risk of dropping a metal tool onto
battery. It might spark or short-circuit battery or other electrical
part that may cause explosion.
12. When working with a lead-acid battery, remove personal metal
items such as rings, bracelets, necklaces, watches...
13. NEVER smoke or allow a spark or flame in vicinity of battery or
engine.
14. Do not charge non-rechargeable batteries.
15. In order to reduce risk of electric shock, unplug charger from AC
outlet before doing any maintenance or cleaning. Turn off controls
will reduce risk.
16. The kit is not supposed to be used by children or by people who are
not able to understand the manual, unless they are supervised by a
responsible person who ensures the proper use of the kit.

MAIN FEATURES

Smart Charger plus Maintenance and Rejuvenation Function
• Easy to Use: The Battery Charger is easy to operate and requires no
technical experience.
• Fully controlled by Microprocessor
• Battery initial condition diagnose
• Battery wiring in vehicle circuit sense
• Enhanced battery rejuvenation (patented technology)
FULBAT - www.fulbat.com
• Battery voltage retention analysis
• Peak pulses for long term maintenance
• Ultra lower power consumption for ECO mode
• Multi Charge Stages:
- Battery condition check
- Enhanced battery rejuvenation
- Soft Start
- Bulk Charging
- Absorption Charging
- Voltage analysis
- Float Mode
- Long term maintenance pulse charge
• Diagnosis & Charge - Automatic diagnosis and charge: On power up,
the charger will automatically diagnoses the battery condition, and
then determine if the battery charger engages the rejuvenation stage
or goes into charging cycle.
• Enhanced battery rejuvenation stage – Patented battery rejuvenation
technology: The program will engage a unique rejuvenation method
with high voltage equalizing and peak pulse reconditioning stage
alternatively applied in turn, which is subjected to the initial battery
internal impendence detection and battery load detection in vehicle
electric system, it could be efficiently desulphated to the some bat-
teries with deep-charge or no charge for many months, and without
any risk if it is connected to the vehicle electric system.
• Charge & Maintain - Automatic Maintenance: The battery charger
could be left unattended and it is full time managed by program; when
the battery is charged to «full» state, the charger automatically
switches to maintain the battery. It will monitor the battery voltage
and continue to peak performance with special pulse charge in long
term maintenance.
• Short circuit or Reverse polarity protection: The charger will auto-
matically turn off when the output short circuit or reverse polarity
occurred and prevent any damage.
• Never overcharge your battery.
• Heavy-Duty cables.
• Corrosion-resistant output connectors.
• Output clips and ring terminals provided: It comes with a quick connect
fly lead and 2 different kinds of connectors, crocodile clips and a ring
terminals. The ring terminals are perfect for permanent connection
to your battery. You can connect the lead to the battery and tuck the
lead away while you are using your vehicle and when you get back to
your garage simply plug the lead back into the charger.
SAFETY & TEMPERATURE FEATURES
The charger contains 4 safety protections:
• Internal overheat protection: The Fulload 1500 is built-in with overheat
and overload electronic circuit. When the charger is overheated,
the charger will decrease the charging current. If temperature is
decreased, the charger will resume to normal charging.
• Timer protection: The charger provides the maximum charging timer
management for each charging stage; this condition may occur if
2