Main Features - Fulbat Fulload 1000 Manual De Usuario

EN
INSTRUCTION MANUAL
FOR LEAD ACID & LITHIUM (LIFEPO4)
This manual contains important safety and operating ins-
tructions for 6V/12V battery charger:
IMPORTANT SAFETY INSTRUCTIONS. Please read this ma-
nual and follow the instructions carefully before using the
charger.
WARNING
1.
The charger is designed to charge 6V/12V lead-acid
and lithium (LiFePO4) batteries from 3Ah to 20Ah.
However, this charger can maintain all battery sizes.
2.
We always recommend that you check the battery
manufacturers specifications before using this charger.
3.
Explosive gases may escape from the battery during char-
ging. Provide ventilation to prevent flames and sparks.
4.
For indoor use. Do not expose char-
ger to rain, snow or liquids.
5.
For charging lead-acid and lithium (LiFePO4)
batteries ONLY (according to the size & voltage
indicated in the specifications table).
6.
Battery acid is corrosive. Rinse immediately with
water if acid comes into contact with skin or eyes.
7.
Never charge a frozen battery.
8.
Never charge a damaged battery.
9.
Never place the charger on the battery while charging.
10.
Be extra cautious to reduce risk of dropping a metal
tool onto battery. It might spark or short-circuit battery
or other electrical part that may cause explosion.
11.
When working with a battery, remove personal metal
items such as rings, bracelets, necklaces, watches...
12.
NEVER smoke or allow a spark or flame
in vicinity of battery or engine.
13.
Do not charge non-rechargeable batteries.
14.
In order to reduce risk of electric shock, unplug
charger from AC outlet before doing any maintenance
or cleaning. Turn off controls will reduce risk.
15.
The charger is not supposed to be used by children
or by people who are not able to understand the
manual, unless they are supervised by a responsible
person who ensures the proper use of it.
FULBAT - www.fulbat.com
Fulload 1000.
2

MAIN FEATURES

Smart battery charger & maintainer:
• Charges and maintains 6V-12V Lead Acid batteries (GEL,
AGM, MF, DRY, Ca/Ca, WET) & 12V LiFePO4 batteries.
• 1A charging current with battery capa-
city up to 20Ah (maintains all sizes).
• 4 charge modes.
• Easy to set up and use : connect, se-
lect a charge mode & forget
• Easy to read LED display.
• Full protected against short circuit, wrong
connections, overcharge and overheat.
SAFETY & TEMPERATURE FEATURES
• Output short circuit protection.
• Overcharge protection.
• Reverse polarity protection: The charger has reverse
polarity and short circuit protection. If a reverse battery
condition exists (ERROR LED will turn flash in RED, only,
while output leads are connected backwards), simply
unplug charger from AC power and properly remake
the connections as described in this manual.
• Internal overheat protection: Fulload chargers have
an internal overheat protection. The power will be
reduced of the ambient temperature is raised.
• Corrosion-resistant output connectors.
BOX CONTENT
Delivered with:
• 1 x Fulload 1000 Battery Charger with exchangeable Connector.
• 1x clamps set.
• 1x eyelets terminals set.
The eyelet terminals set is perfect for permanent connection
to your battery. You can connect the lead to the battery and
tuck the lead away while you are using your vehicle and when
you get back to your garage simply plugs the lead back into
the charger.
BATTERY TYPES & CAPACITY
• Suits 6V/12V lead acid batteries (SLA, GEL, AGM, MF,
DRY, Ca/Ca) and 12V lithium (LiFePO4) batteries.
• Battery capacity: the following maximum Ah capacities are to