POLTI La Vaporella XT100C Manual De Instrucciones página 19

especially if the appliance is hot.
• Do not change the plug on the power cable.
• If the power cable or the steam hose is
damaged, it must be replaced by the
manufacturer, its service agent or similarly
qualified persons in order to avoid all
possible hazards. Do not use the product if
the power cable and the steam hose are
damaged.
• Do not touch or use the appliance barefoot
and/or with wet body or feet.
• Do not use the appliance near containers full
of water, e.g. sinks, baths and swimming
pools.
• Do not immerse the appliance, including the
power cable and plug, in water or other
liquids.
• Steam must not be directed towards
equipment containing electric or electronic
components.
RISKS DURING USE OF THE PRODUCT –
INJURIES/SCALDING
• The product should not be used in areas
where there is a danger of explosions or in
the presence of toxic substances.
• Do not pour toxic substances, acids, sol-
vents, detergents, corrosive substances
and/or explosives, perfumes or scented
water into the water tank and boiler.
• Only pour water or the water mix indicated in
the section "WHICH WATER TO USE" into
the tank.
• Do not direct the steam jet or the iron onto
toxic substances, acids, solvents,
detergents or corrosive substances. The
handling and removal
substances must be carried out according to
the indications of the manufacturers of these
substances.
• Do not direct the steam jet or the iron onto
explosive powders or liquids, hydrocarbons,
open flames and or extremely hot objects.
• Do not direct the steam jet at the ironing mat
and/or the appliance itself.
• Do not position the product near sources of
heat such as fireplaces, stoves and ovens.
• Do not obstruct the openings and grills on
the product.
• Do not direct the steam jet or the iron onto
any part of the body of people or animals.
• Do not direct the steam jet or the iron onto
clothes while they are being worn.
• Cloths and fabrics
subjected to a deep steam reach very high
temperatures, above 100°C. Take care
when handling the appliance.
• During use, keep the product in a horizontal
position on a stable surface.
• Iron only on supports that are heat resistant
and which allow the steam to permeate.
• When placing the iron on its stand, make
sure that the surface on which the stand is
placed, is stable.
• If the iron rest mat needs to be replaced,
only use original spare parts.
• Do not rest the iron on a base without the
| 18 |
of dangerous
which have been