POLTI La Vaporella XT100C Manual De Instrucciones página 22

6. TURBO PROGRAM
Using the TURBO program, quickly and easily iron even the heaviest
fabrics, smoothing out the most stubborn creases in one go.
Do not use this mode for ironing synthetic, silk and wool
clothing.
To activate this program simply turn the dial to TURBO (4-5). The
Turbo will last for a maximum of 10 minutes, after which the La
Vaporella will automatically switch over to the UNIVERSAL program.
To reactivate, turn the dial to the TURBO program again (4-5).
7. 360° FLUID CURVE TECHNOLOGY
The innovative multidirectional rounded plate with a scratch-resistant
covering allows for 360° ironing. The pointed tip reaches the most
difficult sections and the concentration of steam in this area flattens
even the most stubborn creases. The steam channels spread steam
out evenly for quicker ironing.
8. AUTOMATIC SWITCH-OFF
After 10 minutes without use (calculated from the last operation
carried out on the appliance), the boiler and the iron switch off
automatically. The indicator light flashes.
To reactivate the appliance, turn the dial to the desired program (4-
5).
9. OUT OF WATER
The water level is always visible on the tank.
When there is no water in the tank, the red indicator light displays on
the iron handle (6).
To restart ironing:
- Fill the tank as described in section 1.
- Keep the button on the iron (7) pressed down for at least one
second.
10. LED INDICATOR LIGHTS ON THE IRON
The different coloured lights displayed on the iron's handle (6)
show the state of the iron, making ironing simpler:
YELLOW LIGHT: shows that the appliance is heating up.
The temperature will be reached more quickly if no steam is emitted.
CONSTANT BLUE LIGHT: shows that the appliance is ready to start
ironing and to emit steam.
FLASHING BLUE LIGHT: shows that the iron's temperature is
cooling down.
The setting required will be reached quicker if steam is emitted.
RED LIGHT: shows the iron is oht of water.
11. GENERAL MAINTENANCE
Before carrying out any maintenance on the device, always unplug it
from the power mains making sure that the product has cooled down
before proceeding.
To clean the outside of the appliance, use only a damp cloth.
Do not use detergents of any type.
Clean the iron soleplate when it is completely cold with a damp cloth
or with a non-abrasive sponge.
La Vaporella does not require any maintenance to the boiler. The
ironing is high pressure and uses innovative technology (NO
CALC LONGLIFE) that combats the negative effects of
limescale to increase your iron's lifespan without maintenance.
12. KALSTOP
Kalstop is the natural limescale removal product from Polti for
appliances with boilers for ironing and steam cleaning. Kalstop is the
only anti-limescale product permitted and that is compatible with La
Vaporella.
Regular use of Kalstop, every time the tank is filled with tap water:
- Extends the life of the appliance.
- Allows emission of a "drier" steam
- Contributes to saving energy.
HOW TO USE KALSTOP
12.1 Dilute one phial in 5 litres of water before putting it in the tank.
12.2 Fill the tank as described in section 1.
12.3 Start ironing the garments.
Kalstop is sold in packages of 20 phials at household appliance
stores, at Polti authorized service centres and at www.polti.com.
13. STORAGE
Wait until the iron has cooled down completely before storing. 13.1
Turn off the appliance and disconnect from the mains electricity.
13.2 Make sure that the removable rest mat is put back in the correct
place.
13.3 Position the iron on top of the mat, inserting it into the back
section of the appliance first (10) and then securing it with the locking
slide (11) located on the front section of the appliance. 13.4 Remove
the water tank and empty it.
13.5 Insert the steam hose in the special housing located on the left
side of the appliance (12-A).
13.6 Insert the power cable in the special housing located on the right
side of the appliance (12-B).
Before storing La Vaporella, make sure that the iron is locked by
setting the lever on the slider to (see point 13.3).
| 21 |