Control Panel; Commissioning The Device - Domo DO315IP Manual De Instrucciones

DO315IP
heaters or other sources of heat.
• Make sure that the mains connection cable is not
damaged or squashed beneath the device.
• Make sure that the mains connection cable does
not come into contact with sharp edges and/or hot
surfaces.

CONTROL PANEL

1. Cooking plate 1400W
2. Cooking plate 2000W
3. On/standby switch
4. Power selection (heat)
5. Temperature selection (temp)
6. Timer
7. Arrow buttons to adjust the
heat, temp and timer selection.

Commissioning the device

• The hotplate's surface consists of temperature-resistant ceramics. In case of
damage, even if this concern only a small tear, disconnect the device from the
power supply immediately and contact the customer service.
• We recommend not placing any metal kitchen utensils, cookware or pan lids,
knives or other metal objects on the hotplate. These may heat up when the device
is turned on.
• Do not place any magnetically objects like credit cards, cassettes etc. on the glass
surface while the device is in operation.
• On order to avoid overheating, do not place any aluminium foil or metal plates on
the device.
• Do not insert any objects like wires or tools into the ventilation slots. Attention:
this may cause electric shocks.
• Do not touch the hot surface of the ceramic field. Please note: the induction
hotplate does not heat up itself during cooking, but the temperature of the
cookware heats up the hotplate!
• Do not heat up any unopened tins on the induction hotplate. A heated tin could
explode; therefore remove the lid under all circumstances beforehand.
• Scientific tests have proven that induction hotplates do not pose a risk. However,
persons with a pacemaker should keep a minimum distance of 60 cm to the device
while it is in operation.
1
7 4 5 6
34
3
2