Assembly Steps; Product Functions - Byox SCAR Instrucciones De Uso

PARTS OF THE TRICYCLE
Before assembly of the tricycle, take all the parts out of the packing and check if all of the bellow listed are present. Keep the
packages until you finish the assembly completely. SEE FIGURE PD:
1.Rear Wheels – 2 pcs; 2.Seat and backrest – 1 pc; 3.Frame – 1 pc; 4.Handrail – 1 pc; 5.Rear basket – 1 pc; 6 and
11.Footrests – 1 pc; 7.Pedals – 2 pcs; 8.Front wheel – 1 pc; 9.Cup/ Bottle holder – 1 pc; 10.Canopy – 1 pc; 12.Rear brakes
– 2 pcs; 13.Front fork – 1 pc; 14.Front mudguard – 1 pc; 15.Handlebar – 1 pc; 16.Handlebar grip – 1 pc; 17.Safety belt – 1
pc; 18.Parent control handle – 1 pc.

ASSEMBLY STEPS

1.Step 1 – See Figures 1, 2, 3 and 4: Unfold the frame and fix the rear wheel in the rear part of the frame. Attention: There
is a button on the rear frame for faster assembly of the rear wheels.
2.Step 2 – See Figures 5 and 6: Slide the front fork with the front wheel through the hole in the frame. Be careful how the
front fender is pointed. Check if the assembly is successful. Rotate the steering wheel to the left and right. If it controls the
front fork and the fork does not fall out of the frame, then you have assembled the parts correctly. Then, install the pedals on
each side of the front wheel.
3.Step 3 – See Figures 7, 8 and 9: Install the footrest in the front part of the frame. Attach the bottle/ cup holder to the
plastic hook in the front part of the frame.
4.Step 4 – See Figures 10,11, 12 and 13: Take the seat with the screw. Slide the screw though the base of the seat and
frame. Put the base of the seat on the frame correctly according to the ribbing. After that attached the seat by aligning it with
the fixing screw. The screw must pass through the bottom part of the frame Fix the screw with its black cap (Figure 11). Fix
both of the parts of the safety board to the supports on each side of the seat (Figure 12). Slide one of the parts of the safety
board through the opening of the crotch part of the soft seat (Figure 13). After that the parts of the safety board to each
other.
5.Step 5 – See Figures 14:. Put the rear basket on the hanger on the push bat.

PRODUCT FUNCTIONS

1.Seat – Turn the seat so that the child faces the parents or the road, using the screw in the base of the seat. Always fix the
seat with the screw.
2.Backrest – The backrest can be adjusted in several laying positions using the button on its' back part. Push it and in the
same item put the backrest in the wanted position. Release the button in order to fix the seat.
3.Folding frame – Put the push bar in the lowest position. Then push the red knob at the back of the frame and in the same
time move the parent control handle to the bottom of the tricycle.
4.Adjusting the push bar - Open the clamps of the push bar as shown in Figure 15. Pull up or down the push bar and place
it in the position you want. Close the clamps to secure the push bar.
CLEANING AND MAINTENANCE OF THE PRODUCT
1. Cleaning:
• Clean with soft dry cloth. Do not use aggressive cleaning detergents - alcohol or bleach – based ones, or such,
containing abrasive particles.
•
Do not spray water or other liquids directly on the tricycle during play or cleaning. This way you will avoid the risk of
damage of the tricycle due to rush on the metal parts and disturbance in the stability of the connections.
•
Clean the tires regularly from sand or dust.
•
Keep the tricycle clean.
2. Maintenance and storage:
•
Before each use of the tricycle, check carefully the working order of all parts and connections:
- The screws must be tightened well;
- The wheels and handlebar must be strong and fixed stably;
- The wheels must move freely.
•
You must not use the tricycle if you find that there are any loose, worn or damaged parts.
•
The long use of the product may lead to loosening of the screws and nuts. Please, make sure that all nuts and screws
are tightened well, in order to protect the child from injury.
•
Warning! DO NOT OVERTIGHTEN, in order to avoid breaking of the parts.
•
Exposing the product to direct sunlight may lead to discoloration or fading of the color.
•
Store the tricycle at a cool and dry place, when you are not using it.
• Store the product away from direct sunlight and sources of heat – open fire, heaters or cookers.
•
Check the product regularly before and after each use for malfunctions, cracks, broken or missing parts. Stop using it if
you find any damage until it is removed. For this purpose, contact the person you bought the product from, or the
importer!
Address: Bulgaria, Sofia, Trebich quarter, 1 Dolo Str., Tel.: +359 2/ 936 07 90
Made for BYOX Importer: Moni Trade Ltd. ,
Web: www.byox.eu; www.moni.eu
9