Assembly Steps; Product Functions - Byox EXPLORE Instrucciones De Uso

33.Take care of the people and pets around you, while using the product.
34. Be careful in order to avoid collisions with other objects!
35.You must teach your child to always ride the tricycle only forwards, in the direction of movement, without turning back,
while in motion.
36.The child must not jump with the tricycle from curbs or other higher parts, as well as bumping into them.
37.Do not use the tricycle in rainy days.
38.The use of the tricycle in rainy/ wet weather may lead to damages or rust to the product. Keep the product away from
water.
PARTS OF THE TRICYCLE
Before assembly of the tricycle, take all the parts out of the packing and check if all of the bellow listed are present. Keep the
packages until you finish the assembly completely. SEE FIGURE PD and the table with parts: 1.C – canopy; 2.H –
handlebar; 3.FB – front basket; 3.FW – front wheel; 4.FR – footrest; 5.RB – rear brakes; 6.RW – rear wheels; 7.BB – rear
basket; 8.BS – buttons for adjusting the backrest; 9.PB – parent control handle; 10.F – frame of the tricycle; 11.BF – rear
footrests; 12.HR – headrest.

ASSEMBLY STEPS

1.Step 1 – See Figure 1: Unfold the rear foldable part of the frame according to the arrow on Figure 1. to fold the frame,
press the button on the frame.
2.Step 2 – See Figure 2: Attach the brakes in the rear part of the frame. Take care when attaching the brakes. You must
distinguish correctly the right brake from the left one. Take one of the rear wheels with the attached to it rear axle. Slide the
axle through the opening in the rear brake and press forward to fix the wheel. Attach and the other rear wheel the same way.
3.Step 3 – See Figure 3: Press down the button of the footrest. Unfold the right and left parts of the footrest. To fold the
footrest slide the button down and fold it to the frame. Then close the right and left parts of the footrest.
4.Степ 4 – See Figure 4: Place the rear basket with the rear footrest on the frame. Press carefully down to fit them. Note
that the basket must be placed first and then the footrest.
5.Step 5 – See Figure 5: Press the buttons on both sides of the backrest to up it in straight position. Using these buttons
you can adjust the backrest in several laying positions.
6.Step 6 – See Figure 6: Slide the front fork with the front wheel in the opening in the frame. Be careful how the mudguard
is pointed. The arrow in the it must be pointed forwards. Put the front basket on top of the front fork, then put the steering
wheel and push down. The button of the steering wheel must be facing the road. You will hear a clicking sound showing the
successful fix of the handlebar to the front fork. Check if the assembly is successful. Rotate the steering wheel to the left and
right. If it controls the front fork and the fork does not fall out of the frame, then you have assembled the parts correctly.
7.Step 7 – See Figure 7: The safety board can be pre-assembled to the backrest of seat. Press the buttons on each side of
the safety board to remove it and to put the child in the seat. Put the safety belts to the child and then put the safety board
back on.
8.Step 8 – see Figure 8: Fix the headrest to the backrest as shown in the figure.
9.Step 9 – See Figures 9 and 10: The canopy is pre-assembled to the backrest. Unfold it before use.
10.Step 10 – See Figure 11: Put the parent control handle in the rear part of the frame. Press down to fix it.

PRODUCT FUNCTIONS

1.Foldable footrest – Figure 3: The footrest can be unfolded in order your child to place its feet on it. Unfold it before the
child sits in the tricycle. Fold it back when you will not use the tricycle.in Step 3 from ASSEMBLY STEPS is described the
way of unfolding and folding.
2.Adjustable backrest – Figure 12: The backrest can be adjusted in several positions with the side buttons. Press them
and simultaneously with that put the backrest in the needed position. Release the buttons to fix the backrest.
3.Rotating seat – See Figure 13: In order to rate the seat in position with the child facing you or the road, loosen the screw
in the base of the seat. Rotate the seat and put it in the needed position. Then tighten the screw again to fix it.
4.Foldable frame – See Figure 1: Fold the frame by press the red button and simultaneously move rear frame to the front.
5.Detachable canopy– See Figure 14: Remove the headrest first. And then lift the canopy holder and remove it.
CLEANING AND MAINTENANCE OF THE PRODUCT
1. Cleaning:
• Clean with soft dry cloth. Do not use aggressive cleaning detergents - alcohol or bleach – based ones, or such,
containing abrasive particles.
•
Do not spray water or other liquids directly on the tricycle during play or cleaning. This way you will avoid the risk of
damage of the tricycle due to rush on the metal parts and disturbance in the stability of the connections.
•
Clean the tires regularly from sand or dust.
•
Keep the tricycle clean.
2. Maintenance and storage:
•
Before each use of the tricycle, check carefully the working order of all parts and connections:
- The screws must be tightened well;
- The wheels and handlebar must be strong and fixed stably;
9