Publicidad
Idiomas disponibles
Idiomas disponibles
5
> Install the sealing ring and push the spout
tee up through the mounting surface as far
as possible.
> Install friction washers,fiber washers and
the mounting nut on the spout tee.
> Screw the mounting rings and nut down as
far as they will go.
7
> Install friction washer, fiber washer and
mounting nut on the valves
6
2
7 Nm
5.2 ft-lbs.
> Tighten the screws maximum torque
5 ft-lbs.
> Slide on the plaster shield.
8
> Place the valve on the mounting surface.
> Install mounting rings, sealing rings and
stop ring.
1
7
MAL_57146/19.03.2
Publicidad
