DIMOEL SL1000DC Manual De Instrucciones página 59

3.3.5 Limit stop adjustment
Magnetic limit stop –
The position of the magnets determines the stroke that the door will have it. It is
recommended that the distance between the magnets and the motor´s cover be less
than or equal to 1 cm, otherwise the sensor positioned on it may not detect it and it
may not stop the door. The installation position of magnetic limit stop is shown in Figure
8:
The installation of magnetic limit stop is shown in Figure 9:
Note: The default setting is right side mounting. (According to actual situation,
please refer to the "Note" of section 4.3.5 "Adjustment and operation" to adjust.)
10
Figure 8
Figure 9