Transportation And Storage; Move The Machine; Store The Machine; Technical Data - GreenWorks Pro ST60L03 Manual Del Operador

4. Remove the metal rod.
IMPORTANT
You must install the cut-off blade when you use the trimmer
head.
11 TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before

transportation and storage.

11.1

MOVE THE MACHINE

When you move the machine, you must:
• Stop the machine.
• Remove the battery pack.
11.2

STORE THE MACHINE

• Remove the battery pack from the machine.
• Make sure that children cannot come near the machine.
• Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12

TECHNICAL DATA

Type
Motor
No load speed
Cutting line diameter
Cutting path diameter
Feed Type
English
Cordless, battery powered
60V Brushless
6300/4700 RPM
0.095" / 0.080" (2.4 mm /
2.0 mm)
14 in. /16 in. (35.6 cm / 40.6
cm)
Bump Feed
Weight (without battery
pack)
Battery model
Charger model
The recommended ambient temperature range:
Item
String trimmer storage tem-
perature range
String trimmer operation
temperature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
13

TROUBLESHOOTING

Problem Possible Cause
The ma- No electrical con-
chine does tact between the
not start machine and the
when you battery pack.
push the
trigger.
The battery pack is
depleted.
The lock-out but-
ton and trigger are
not pushed at the
same time.
13
9.15Ibs (4.15kg)
LB602, LB6025, LB603,
LB604, LB605, LB606 and
other BAC series
CAC801, CH60DP01,
60DPC10A, CH60R00 and
other CAC series
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
Solution
1. Remove battery pack.
2. Check contact and in-
stall the battery pack
again.
Charge the battery pack.
1. Pull the lock-out but-
ton and hold it.
2. Pull the trigger to start
the machine.
EN